Eschborn | Hartmannsdorf | Zurich
+49 3722 7351-0
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

PSR 080X

8 Wire Pairs Downconverter

for the Remote Powering System RPS 1600




The PSR 080X is a highly efficient remote counterpart for the PSC 1600 converting the incoming voltage to 48 V DC for powering of active network components. The PSR 080X delivers up to 120 W via eight feeding lines with a power efficiency of up to 92 %. To convert the full power of one PSC 1600 (240 W) at the remote site, two PSR 080X are required. The PSR is also available with IP68 ingress protection (PSR 082X).


  • Power output: ≤ 120 W (8wp)
  • Up to 15 W per line @ 5 km range*
  • Nominal output voltage: 48 V DC
  • Nominal output current DC: 2.5 A (electronically regulated)
  • RFT-C feeding voltage: 140 – 380 V DC
  • RFT-C feeding current: < 60 mA (per each power sink)
  • Up to 92% power efficiency


System Integration

  • Required components at central office: PSC 1600
  • Small footprint (W x D x H): 220 mm x 170 mm x 54 mm
  • IP65 ingress protection
  • Surge protection acc. to ITU-T K.45
  • PSR 0801 – 8 RFT-C lines with 1 m cable fittings
  • PSR 0802 – 8 RFT-C lines with fast-access plug connectors


*assumed parameters: diameter of copper wire = 0.4 mm; wire resistance <1,500Ω


FTTC – Feeding of active components in street cabinets from central office site, e.g. micro-DSLAMs, VDSL2-ONU

FTTB/H – Feeding of active components in buildings from central offices or street cabinets, e.g. micro-DSLAMs, ONU (Eth or VDSL out), fibre switches

Mobile nodes – Providing remote power for small cell-nodes for 4G / 5G networks (eNodeB)

Power resilience for critical telecommunication applications, e.g. emergency lines, monitoring systems, CCTV

error: Sorry, content is protected.