PSC 0801
All-in-one 8 Wire Pairs Upconverter
incl. embedded SNMP remote management module for the Remote Powering System RPS 1600
The PSC 0801 is a very smart all-in-one device of the Remote Power System RPS 1600, which combines in itself the functions of the PSC 0800 (Power Source Central unit, 8 lines) and the PSM 1001 (embedded SNMP remote management module). It’s specially designed to meet remote powering application from an outdoor shelter, where only limited space is given.
Performance
- Power output: ≤ 120 W (8 lines)
- Up to 22 W* output power per line (ca. 15 W in 5 km range**)
- RFT-C feeding voltage: 140 – 380 V DC (factory setting)
- RFT-C feeding current: ≤ 59 mA DC
- 48 V / 60 V DC In
Interfaces
- Embedded LCT / CLI
- Embedded 2-port Ethernet switch
- Southbound interface: RS485
- Northbound interface: SNMPv2/3
- External alarm interface (dry contacts)
System Integration
- Required components at remote site: PSR 04xx / PSR 08xx
- Integrated SNMP Remote Management unit
- NMS Master for PSC slaves
- Optional: Network management system MetroIntegrator
- Local management interface daisy chained up to 253 PSC units
- Very high safety due to detection of correct power sink (PSR unit), short / open loops, overload, unbalance on the wire pairs etc.
- Small footprint (W x D x H): 355 mm x 236 mm x 66 mm
- Very high density: up 27 PSC 0801 units per ETSI N3 rack (= 216 feeding ports)
- Enhanced operational temperature range up to -25°C
PSC output power set to 380 V DC
** assumed parameters: diameter of copper wire = 0.4 mm; wire resistance < 1,500 Ω